Bud Industries WA-1541

Products  >  Enclosures, Racks & Cabinets  > Electronic Enclosures  > Desktop Cabinet  > WA-1541
 


Customer Rating

WA-1541 - Reviews

4 out of 5

 
Bud Industries

Portacab; Aluminum; 9 in.; 8.125 in.; 12 in.; Metallic Gray; Panel Mount
Mfr. Part#: WA-1541
Allied Stock#: 736-8215
Quantity:
 
Documents Notes
View WA-1541Datasheet
View Catalog page #692Catalog Page #692  
 
Pricing (USD) & Availability
Standard Pricing
Availability
31 can ship immediately.
20 can ship in 10 days. Request Lead Time

Min. Order QTY: 1|Multiples of: 1

Overview

        


Design Features. 0.050" aluminum. Front panel recessed 1⁄2" and fits contour of cabinet. Louvered sides. Welded back has opening. Four plastic feet furnished. Bonus Features. Designed for bench or portable use. Light weight, yet strong. Reinforced flexible metal handle recessed to permit stacking. Finish: Metallic gray (MG).

Depth:12 in.
Finish:Metallic Gray
Height:9 in.
Material, Body:Aluminum
Mounting Type:Panel Mount
Screw Type:#6 Sheet Metal Screw
Thickness, Material:0.050 in. (Body), 0.060 in. (Front Panel)
Width:8.125 in.
5
0% Total Reviews: 1 WA-1541 - Reviews
4
100%    
3
0%    
2
0%  
Write a review
1
0%  
Nice cabinet overall,but a few nits WA-1541
Reviewed By: Dean on 11/25/2009 6:36:33 PM
Tech Level: Above-average knowledge - Ownership: 1 week to 1 month
Pros: Professional looking and sturdy. The front panel is flat and easy to machine. The whole cabinet is light for its size & strength.
Cons: The louvers are punched into the case such that the opening faces up. This may be good for convection cooling, but is bad for allowing debris/drips to fall into the cabinet. There are no mounting bosses in the cabinet, so you'll have to drill your own into the bottom and/or back. Also the back panel is welded into place and cannot be removed.
Other thoughts: I would prefer the cabinet if the back were constructed just like the front; a flat removable panel without any pre-punched holes. Then they could sell replacement panels with useful punch outs (such as: one with a standard IEC C14 power inlet cutout and a 100mm or 80mm fan cutout). Also, the louvers really should be punched outwards instead of inwards to deflect in-falling debris.
Did you find this review useful? Yes  | No
File File Type
 

© Allied Electronics, Inc. 2010. All rights reserved.